Black Box Pro Switching Gang Switch Controller Card – 2U RS232 – For Data Networking – 1 x RJ-45 Network LAN 2 x RJ-11 – Twisted PairEthernet – TAA Compliant

Manufacturer : Black Box Corporation

Manufacturer Part No : SM263A

Features

• Ethernet port for SNMP telnet or web browser remote access for individual card switching Rack switching and System Gang Switching
• Supports individual card switching Rack switching and System Gang Switching using the front panel
• Supports Gang Switching using an external +12 VDC signal or external remote contact switches.
• A key lock switch allows you to enable or disable manual switching
• Supports RS-232 communications on the Gang-In and Gang-Out connectors.

Product Details

Product TypeSwitch Control ModuleEthernet TechnologyEthernetProduct FamilyPro SwitchingMedia Type SupportedTwisted PairTAA CompliantYesBrand NameBlack BoxEnvironmentally FriendlyYesEnvironmental CertificationRoHSTotal Number of Ports1Country of OriginUnited StatesHeight4.5″Width4.3″Depth12.8″Compatibility

Black Box SM260A Pro Switching Gang Switch Chassis

ManufacturerBlack Box CorporationProduct NamePro Switching Gang Switch Controller Card – 2U RS232Product LinePro SwitchingApplication/UsageData NetworkingManufacturer Part NumberSM263AManufacturer Website Addresshttp://www.blackbox.comMarketing Information

• If you plan to daisy-chain multiple chassis the Controller Card in the first chassis controls the entire system.

The advanced design of the Pro Switching System 2U (SM260A) gives incredible operational flexibility and performance. Switch one card individually or switch the entire chassis through a Controller Card. You’ll need one Controller Card per rack chassis. If you plan to daisy-chain multiple chassis the Controller Card in the first chassis controls the entire system.

This card enables you to switch the chassis from anywhere via an RS-232 or IP connection.

We also offer an RS-232 Only Controller Card (SM263A) which enables you to gang switch via the manual toggle switch or with serial commands.

Or if you want to extend RS-232/IP control to a second daisy-chained Pro Switching System chassis order the SNMP Expansion Controller Card (SM264A). This enables you to send hardware control signals and control the daisy-chained system with RS-232 messages through the RS-232/Ethernet (SNMP) Controller Card (SM262A).

Ordering Instructions | First order the chassis…

Pro Switching System 2U 18-Card (SM260A)

Next order at least one power supply | Power Supply Cards:

Redundant Power Supply Cards (NOTE: cards requires two chassis slots.):

100 – 240-VAC Input (SM261A-VAC)

-48-VDC Input (SM261A-VDC)

Or order:

AC External Adapter Card (SM261A-CARD) ( NOTE: card requires one chassis slot.)

And at least one power supply (order two for redundant power)…

Power Supply 120 – 240 VAC External (SM961A-PS)

…then select a Controller Card…

RS-232/Ethernet (SNMP) (SM262A)

RS-232 Only (SM263A)

SNMP Expansion (SM264A)

…next choose your A/B Switch Cards…

DB25/RS-232 (SM265A)

DB25/RS-530 (SM266A)

Video F-Connector Latching (SM276A-LCH)

Video F-Connector Non-Latching (SM267A)

Multimode Fiber Optic:

ST Latching (SM277A-MM-ST-LCH)

SC Latching (SM277A-MM-SC-LCH)

ST Non-Latching (SM277A-ST)

SC Non-Latching (SM277A-SC)

Single-Mode Fiber Optic:

ST Latching (SM278A-SS-ST-LCH)

SC Latching (SM278A-SS-SC-LCH)

ST Non-Latching (SM278A-ST)

SC Non-Latching (SM278A-SC)

RJ-45 Copper:

RJ-45 CAT5 (SM268A)

RJ-45 CAT6 (SM269A)

For empty slots order…

Blank Panel Front or Rear 2U (SM279A-BLNK)

Questions? Contact our FREE Tech Support.

Interfaces/Ports Details1 x RJ-45 Network LANLimited Warranty1 YearWeight (Approximate)0.94 lb